Network alarm linkage EV-9019

Product features:

1. Collect the fire alarm signals of the fire center to realize the linkage alarm function with the fire system;

2, Network based transmission control form, direct access to the network, without other conversion equipment, can realize the fire adjacent layer, the whole area alarm function.

Product Overview:

1. Standard cabinet type design (2U), black alumina wire drawing panel, humanized pull hand, exquisite technology, fully show high-grade temperament;

2, 32 lines of fire alarm acquisition interface, can be arbitrarily expanded road number;

3. Automatically send the alarm information to the server to perform the playing task. Adjacent layer alarm and whole area alarm can be set arbitrarily;

4, Alarm voice file is stored in IP network broadcast server, no need to configure the alarm voice generator, alarm music can be set arbitrarily, alarm matrix has the function of address dialing, a set of system can be arbitrarily added multiple alarm matrix;

5. Each road has LED alarm indication;

6, With two kinds of alarm collection trigger mode, high, low level and short circuit signal mode for users to choose;

7, Standard equipped with two 10/100M RJ45 network switch interface, the interface has no input and output, directly access to the network, can accept the control of IP broadcast control software;

8, Ethernet port can be accessed, support cross-network segment and routing.

9, Standby power is less than 2W, meet the national environmental protection and energy conservation certification standards;

10. One-key all-area alarm function;

11, Support protocols: TCP/IP, UPP, IGMP (multicast);

12. Product size: 485*88*345mm